Water flowsaver flush control valve

Description

Water flowsaver flush control valve replacement. A premium ASCO Solenoid valve for fitting to water supply (15mm compression fit) as supplied with the water control Flowsaver. Suitable as an alternative for the Marnic water urinal controllers.

Over a period of years lime scale can also cause valves to seize and fail. If your urinal flow control sensor unit is still working, then a replacement valve is a cost-effective way to get it functioning again.

Water Flowsaver Flush Control Valve

The WRAS approved WC solenoid water flowsaver flush control valve is manufactured to a high standard by Asco. This valve also has a magnetic latch operation and is usually used in toilet flushing systems.  This two-way valve is normally closed and energised to open.

Flowsaver Valve Technical Data

• 2mm Orifice with compression fittings for 15mm pipe
• Voltage: 6V DC latching valve with brass body
• Power: 6W
• Compliance & Approvals: WRAS Approved IEC 335  IP65
• Max. Working Pressure: 12 bar: Static
• Min Working Pressure: 1 bar
• Connection: Supplied 15mm compression fitting
• Orifice Size: 2mm (for standard pressure)
• Pressure rating: 10 Bar
• Operation type: Latching
• Includes electrical connection: Supplied spade connector kit

This product is a replacement Valve for the Flowsaver gent’s urinal management system.

About the Flowsaver water savers

The award-winning system also uses innovative technology to prevent unnecessary urinal flushing when your washroom is empty, and minimal flushing when it is in use, saving up to 80% of urinal flush water.

Additional features:

• Saves water and also saves money

Uncontrolled as well as excessive urinal flushing can waste water and money. That’s why the flow saver flush control system is designed to match the urinal flush cycle to the footfall using the urinal, ensuring both optimum hygiene levels and saving.

Flowsaver Intelligent Operation

The system also uses an electronic PIR sensor unit which is linked to a solenoid valve installed into the water supply 15mm pipe of the urinal cistern. The infrared sensor detects movement up to 3 metres away and schedules automatic flushes accordingly