Water Flow Saver Urinal Flush Sensor

Description

Water flow saver urinal flush sensor system is a battery powered PIR sensor flow control for cisterns.

Maintains hygiene standards as well as conserving water and dramatically cutting water costs – saving up to 95% of water usage compared with an uncontrolled cistern, and around 30-40% against more basic water management saving systems.

The water flowsaver flush sensor is an electronic control PIR unit for attachment to a solenoid valve for installation into the supply pipe.

The unit also monitors washroom traffic to schedule cistern flushes. Where no motion is detected a hygiene flush is initiated at 12-hour intervals.

During high usage periods where the number of detections exceeds 20, the unit will also temporally switch from 30 or 60 minute flushing to 15-minute flushing for improved hygiene.

Water Flow Saver Urinal Flush Sensor Features

With function as well as service in mind these urinal water saving units are perfect for most washrooms.

• Anti-Vandal Polycarbonate Domed Housing
• Test Cycle Function
• Easy Setup with LED Status Indicator and also Beeper
• Battery Powered as well as a low battery warning light
• Tamper Proof Cover With Key
• Wall or Ceiling Mounted 
• High Quality WRAS Approved ASCO Latching Solenoid Valve (Sold Separately)

  

PIR Water Saver Includes:

• Flush controller unit with PIR sensor eye for wall and also ceiling mount above the urinals
• Fixing plugs and also screws
• Instructions
• Sensor key

Washroom Urinal Water Flow Saver Specification

Designed for comercial washroom facilities these units are also easy to install and maintain.

• Construction: ABS/PC
• Sensor range: 3 metres
• Motion sensor: Passive Infra-Red (PIR)
• Attaches to water control: DC latching solenoid valve
• Water Pressure: 0.5 – 12 bar using the standard 2.0mm orifice valve
• Power: 4 x AA Battery cells (LR6)
• Typical Battery Life: Alkaline batteries 12-18 months, Lithium batteries 2-3 years (not supplied)
• Dimensions: 130 x 130 x 45mm