Gents Water Flow Saver

Description

Washroom water flow saver system is a battery powered PIR sensor flow control kit for urinal cisterns, everything you need in one box.

Maintains hygiene standards as well as conserving water and dramatically cutting water costs – saving up to 95% of water usage compared with an uncontrolled cistern, and around 30-40% against more basic water management saving systems.

The Flow Saver consists of an electronic control sensor unit as well as a solenoid for installation into the water supply pipe of a urinal auto cistern. The unit also monitors washroom traffic to schedule cistern flushes. Where no motion is detected a hygiene flush is initiated at 12-hour intervals. During high usage periods where the number of detections exceeds 20, the unit will also temporally switch from 30 or 60 minute flushing to 15-minute flushing for improved hygiene.

Washroom Water Flow Saver Features

With function as well as service in mind these urinal water saving units are perfect for most washrooms.

• Anti-Vandal Polycarbonate Domed Housing
• Test Cycle Function
• Easy Setup with LED Status Indicator and Beeper
• Battery Powered as well as a low battery warning light
• Tamper Proof Cover With Key
• Wall or Ceiling Mounted 
• High Quality WRAS Approved ASCO Latching Solenoid Valve 

  

RTX Water Saver Kit Includes:

• Flush controller unit with sensor eye for wall or ceiling mount above the urinals
• Asco solenoid valve for fitting to water supply (15mm compression fit)
• Approx. 1m of  two core cable to connect controller to solenoid
• Cover release key
• Fixing plugs and also screws
• 4 x AA  LR6 Alkaline Batteries

Washroom Urinal Water Flow Saver Specification

Designed for comercial washroom facilities these units are also easy to install and maintain.

• Construction: ABS/PC
• Sensor range: 3 metres
• Motion sensor: Passive Infra-Red (PIR)
• Water control: DC latching solenoid valve
• Water Pressure: 0.5 – 12 bar using the standard 2.0mm orifice valve
• Power: 4 x AA Battery cells (LR6)
• Typical Battery Life: Alkaline batteries (supplied) 12-18 months, Lithium batteries (not supplied) 2-3 years
• Dimensions: 130 x 130 x 45mm

Urinal water flowsaver Instructions

The urinal flowsaver instructions covers the installation of a PIR sensor unit as well as a solenoid for installation into the water supply pipe of a urinal auto cistern. The unit also monitors washroom traffic to schedule cistern flushes.

Where no motion is detected a hygiene flush is initiated at 12-hour intervals. During high usage periods where the number of detections exceeds 20. The unit will also temporally switch from 30- or 60-minute flushing to 15-minute flushing for improved hygiene.