Foam Soap Dispenser Replacement Valve

Description

Foam soap dispenser replacement valve for plastic as well as metal hand sanitiser dispensers.

In the unfortunate event that your soap dispenser is filled with the wrong product causing your valve to not function correctly. Replacements and spares are available without the need to purchase a complete new unit or reservoir.

Foam Soap Dispenser Replacement Valve

Our experience shows that the majority of issues with dispenser malfunctions is caused by incorrect products used. This could be by helpful cleaners and also staff unfamiliar with what type of refills should be used.

Should your reservoir be filled with the wrong product the only option is to empty this out and thoroughly clean out all the incorrect liquid. If the valve is congealed you could also try soaking in warm water to unblock.

How To Change Dispenser Valves

All our foam and liquid dispensers incorporate an easy to exchange valve release system with interchangeable valves.

Dispenser Valve Removal

• Simply remove your reservoir with the valve attached and twist the valve slightly to remove from the refill reservoir.  Reverse technique to also install new valve on the empty reservoir.  

Plastic Dispenser Valve Removal

• Remove reservoir and as well as the valve by depressing the top right tab withing the unit to facilitate removal of valve

 

Note: For ease the images above show the valve with the reservoir already removed. Removal of the internal components is the same with the reservoir attached to the valve. Valve colour supplied may be light blue or white depending on stock availability.

Installation Areas To Avoid

Placement of your dispensers can also seriously impact on the contents of your dispensers. Placing above radiators or other heat sources should be avoided.

This warm rising air will quickly dry out the liquid within the valve and also cause it to congeal resulting in a blockage of the valve.